A gloved hand holding a Zabidou inline inspection unit at the Vossloh Australia concrete sleeper plant

Advanced Manufacturing · Quality Assurance

3D laser scanning on theproduction line

3D laser scanning measures a manufactured item against its design by sweeping a laser across the surface and recording hundreds of thousands of surface points, producing a dimensional record of the item as it was built.

On a production line, the value of that record depends on when it arrives. Scanning commissioned as a survey returns its result after the panel has cured and the section has left the jig. Zabidou performs the same class of measurement inside the production step, in real time, so the result is available while the item can still be corrected.

Zabidou in production today

QLD + VIC

Operating in factories across Queensland and Victoria today.

100%

Inspection coverage on finished items as they come off the line.

Silver

Associate Member, Australian Steel Institute.

Bronze

Member, National Precast Association Australia.

What a 3D laser scan captures

A 3D laser scan captures three classes of information without contacting the item: its geometry as built, the position of its features relative to each other and to the design, and the deviation of its surfaces from the intended form.

Geometry as built

01

The dimensions of the item as manufactured rather than as drawn: lengths, depths, angles, and the distances between them.

Feature position

02

The location of every cast-in insert, void, bolt hole, cleat and edge, measured against the drawing and against the surrounding features.

Surface deviation

03

The departure of each face from flat or true, expressed as a measured value, which renders voids, steps and bows as quantified deviations.


The limits of survey scanning in production

Scanning changes an outcome only when the result reaches the line while the item can still be altered. The constraint is one of timing rather than measurement accuracy, and it is where conventional scanning workflows lose most of their operational value.

01

The item is already finished

By the time a survey scan is commissioned, the item is complete. The measurement records the deviation accurately, but it is taken too late in the process to prevent it.

02

The output requires specialist interpretation

A raw scan is a point cloud rather than a result. It must be registered, aligned to the model and read as a deviation map, which typically takes a day or more and requires a specialist operator.

03

Production continues during processing

Lines do not hold while a scan is processed. Where a further dozen panels or sections are produced in that window, the same deviation is carried into all of them.

Measurement inside the production step

Zabidou positions the measurement at the point of manufacture and returns a pass or fail result in real time, while a correction still costs almost nothing.

The hardware is factory integrable and retrofits onto an existing line, reading every item as it comes off rather than a sample pulled for review. The same check applies on a precast concrete bed and on a steel fabrication line, with only the terminology changing: a cast-in insert out of position, or a bolt hole drilled off centre.

A deviation identified while the mould is still open, or while the section remains in the jig, is a correction. The same deviation identified at dispatch is a non conformance, with the associated hold, documentation and delay.

Every item measured produces a record of as-built output against as-planned design, which is the basis of a digital twin in construction and the evidence that operations, financiers and customers require.

Measurement is automated; the quality decision remains with the operator, who receives the measured values in seconds while the item is still in front of them.

What Zabidou checks on the line

Five checks run on every item as it is produced, covering the same ground a survey scan covers and returning it as a pass or fail at the station, kept as a record against that item.

Full 3D As-built vs As-planned

3D as-built comparison icon

Complete 3D measurement and verification of as-built output against a Golden Sample or design intent, for full dimensional compliance without stopping the line.

Set-out Verification

Set-out verification icon

Automated, real-time verification that components are correctly positioned before and during production, while the mould is still open or the section is still in the jig.

Surface Anomaly Detection

Surface anomaly detection icon

Inline detection of surface defects, voids and irregularities at industrial speed, fully automated and without manual inspection.

Key Dimension Measurements & Verification

Key dimension measurement icon

Precise measurement and verification of critical dimensions against a Golden Sample or the drawings, inline, in real time, at scale.

Digital Provenance

Digital provenance icon

Manufactured-unit centric digital provenance that automatically delivers the full audit history operations, financiers and customers demand.


Manual checks, survey scanning and inline measurement compared

Most precast and fabrication plants still check by hand, with a tape measure and a visual inspection before the pour. That is slow, it varies between inspectors, and it leaves no record beyond a signature, so the first reliable sign of a problem is often a remake. Survey-grade scanning improves the measurement without changing when the measurement arrives. Inline measurement keeps the check where the hand check already sits in the process and replaces the instrument with what amounts to a really good sub-millimetre tape measure.

Manual checks, scanning commissioned as a survey, and scanning built into the line.
 Manual checksSurvey scanningInline measurement
When it happensBefore the pour and again at dispatch, at whatever interval the inspector can cover.After the item is finished, often after it has moved.Inside the production step, while the item is still on the line.
What you getA signed checklist, and the measurements the inspector had time to record.A point cloud and a deviation report, once it has been processed.A pass or fail at the station, then the record behind it.
Who reads itThe inspector, then whoever receives the paperwork.A scanning specialist, then the quality team.The operator at the station, via an indicator visible from the work position.
CoverageThe items and the features there was time to check.The items chosen for scanning.Every item that comes off the line.
Cost of actingA remake, or a rejected batch once the customer finds it.Rework, scrap, or a conversation with the customer.A correction before the item is finished.
The green Zabidou inspection enclosure mounted over the production line at Vossloh Australia, with cast sleepers stacked in the yard beyond
A Zabidou sensor unit mounted on the line guarding at Vossloh Australia, above the sleeper moulds

Common questions about 3D laser scanning

What is 3D laser scanning used for in manufacturing?

3D laser scanning is used to measure a manufactured item against its design without contacting it. In precast and fabrication plants this covers critical dimensions, the position of inserts, voids and bolt holes, and the flatness or trueness of each face, reported as a deviation against the drawing or an approved Golden Sample.

Scanning is a capture method. Its value in production depends on what the measurement is compared against and how quickly that comparison reaches the person able to act on it.

How accurate is 3D laser scanning?

Accuracy varies with the scanner, the standoff distance and the surface being measured, so a single figure is not meaningful across applications. Any current system resolves detail considerably finer than a tape measure or a straight edge.

In a production environment the governing constraint is latency rather than resolution. A measurement of high precision delivered after dispatch does not alter the outcome.

What is the difference between 3D laser scanning and inline inspection?

3D laser scanning describes how a measurement is captured. Inline inspection describes when it is captured: inside the production step rather than after it.

The two are often conflated because both produce dimensional data. The operational difference is in the result: a survey scan documents what was produced, while an inline check returns that information in time to change what is produced next.

Can 3D laser scanning be done on a production line?

Yes. The measurement is performed on the line, as part of the production step.

Zabidou retrofits onto an existing line, so every item is measured as it comes off and the operator receives a pass or fail result at the station. No new facility or production shutdown is required.

What does a 3D laser scan produce?

A 3D laser scan produces a point cloud: a set of measured points describing the surface the scanner observed.

The usable output is the comparison. Aligned to the design, the point cloud becomes a deviation map identifying where the item differs from the intended form and by how much, which is the basis on which a quality decision is made.

Get in Touch

Ready to explore how ultra-vision can transform your operations? Send us a message and our team will be in touch.